AFFF

IFP UNILIGHT GREEN AR-SFFF 3x3 is a specially formulated Fluorine Free non-toxic foam liquid concentrate, free from any fluoro-chemical and fluoropolymers. The highly stable foaming nature of IFP UNILIGHT GREEN AR-SFFF 3x3 allows the foam to spread across the burning liquid and get control over the fire. It is effective on hydrocarbon fires as well as polar solvent fires. IFP UNILIGHT GREEN AR-SFFF 3x3 is used at 3x3 proportioned solution on hydrocarbon liquid fires and alcohol fires. It does not contain any fluoro-chemical surfactant and therefore completely free from PFOS, PFOA and its derivatives and therefore complies with Directives (EU) 2017/1000 on PFOA and 2019/1021 (EU POPs directive). It is readily biodegradable and therefore most environment friendly foam and used a multipurpose fire fighting foam agent.

Features

• Designed to use with matching inline inductor or premixed solution.
• High volume of stable foam.
• Rapid coverage.
• Operates at low inlet foam -water solution pressure.
• Long throw of cohesive foam stream.
• Light in weight for easy portability.
• Ideally suited for tank farm bund protection
• Maintenance free.

Model

IFP MX-225L
IFP MX-400L
IFP MX-450L
IFP MX-600L
IFP MX-900L
IFP MX-1200L
IFP MX-1600L
IFP MX-1800L

The IFP TURBO-HX, High Expansion Foam Generators are powered by a water turbine, constructed with corrosion resistant Stainless Steel 316 grade for use in challenging environment. The generators are designed to expand the foam solution with Expansion ratios from 350:1 to 925:1, depending upon the solution flow rate and the water pressure. The High Expansion Foam Generator requires no other source of power such as electricity or gasoline engines. They are powered by the foam solution driving a hydraulic (water) motor or turbine. The expansion of foam solution is achieved by spraying the solution onto a stainless steel screen, then an air stream created by the fan attached to the motor blows air through the screen to produce a mass of foam bubbles. The continuous flow of the foam solution and the movement of air through the screen will produce large volumes of finished foam.

Model

IFP TURBO-HX 3000

IFP TURBO-HX 10000

IFP TURBO-HX 21000

Approvals and listing

UL Listed

IFP UNILIGHT AGFFF, AR-AFFF, commonly known as Alcohol Resistant Aqueous Film Forming Foam Concentrate, is specially formulated non-toxic, viscous foam liquid concentrate, for use in hydrocarbon as well as polar solvent fires. The foam concentrate contains special type of fluorochemical surfactant (C6 technology), hydrocarbon surfactant, solvent, stabilizer, biocide and polysaccharides. It produces aqueous film on hydrocarbon fuel to prevent the fuels vapors come in contact with air and forms a cohesive and regenerative polymeric barrier floats over the alcohol preventing the foam bubble for mixing with polar solvents. IFP UNILIGHT AGFFF, AR-AFFF does not contain any PFOS or PFOA.

IFP UNILIGHT GREEN AR-SFFF 3x3 is a specially formulated Fluorine Free non-toxic foam liquid concentrate, free from any fluoro-chemical and fluoropolymers. The highly stable foaming nature of IFP UNILIGHT GREEN AR-SFFF 3x3 allows the foam to spread across the burning liquid and get control over the fire. It is effective on hydrocarbon fires as well as polar solvent fires. IFP UNILIGHT GREEN AR-SFFF 3x3 is used at 3x3 proportioned solution on hydrocarbon liquid fires and alcohol fires. It does not contain any fluoro-chemical surfactant and therefore completely free from PFOS, PFOA and its derivatives and therefore complies with Directives (EU) 2017/1000 on PFOA and 2019/1021 (EU POPs directive). It is readily biodegradable and therefore most environment friendly foam and used a multipurpose fire fighting foam agent.

Features

• Designed to use with matching inline inductor or premixed solution.
• High volume of stable foam.
• Rapid coverage.
• Operates at low inlet foam -water solution pressure.
• Long throw of cohesive foam stream.
• Light in weight for easy portability.
• Ideally suited for tank farm bund protection
• Maintenance free.

Model

IFP MX-225L
IFP MX-400L
IFP MX-450L
IFP MX-600L
IFP MX-900L
IFP MX-1200L
IFP MX-1600L
IFP MX-1800L

The IFP TURBO-HX, High Expansion Foam Generators are powered by a water turbine, constructed with corrosion resistant Stainless Steel 316 grade for use in challenging environment. The generators are designed to expand the foam solution with Expansion ratios from 350:1 to 925:1, depending upon the solution flow rate and the water pressure. The High Expansion Foam Generator requires no other source of power such as electricity or gasoline engines. They are powered by the foam solution driving a hydraulic (water) motor or turbine. The expansion of foam solution is achieved by spraying the solution onto a stainless steel screen, then an air stream created by the fan attached to the motor blows air through the screen to produce a mass of foam bubbles. The continuous flow of the foam solution and the movement of air through the screen will produce large volumes of finished foam.

Model

IFP TURBO-HX 3000

IFP TURBO-HX 10000

IFP TURBO-HX 21000

Approvals and listing

UL Listed